PUTW #27 Acoustic Guitar Soundboard Pickup
Comes pre-wired to a high quality endpin jack, and uses a proprietary film pickup mounted with adhesive tape to the bridgeplate. The tone is rich and full, yet surprisingly feedback resistant. This is the system that put PUTW on the map, and is easy to install without modifications to the instrument other than an enlarged endpin hole for the output jack. For coupling to a Stealth pre-amp, specify ST when ordering.
Retail $150.00, Buy Direct $125.00

PUTW #54 Acoustic Guitar Dual Element SBT
This pickup is our flagship soundboard pickup for steel string guitars. Comprised of a pair of Model #27 steel string pickups, the installation is greatly simplified, and the tone is very natural with a slight emphasis in the bass & treble registers. The two pickup elements are placed on either end of the bridgeplate so that one is right next to the bass X brace and the other is right next to the treble X brace. There is no guess work involved in the positioning, and the result is very feedback resistant due to the stiffness of the mounting locations. The tone is improved across the board from our single element pickups, and this is especially noticeable on lighter or more boutique instruments that can tend to have an exaggerated midrange emphasis with other soundboard pickups. The tones are clear and solid with more pronounced detail than with our single model #27s, and midrange overloads are eliminated.
Retail $200.00, Buy Direct $185.00

The I/O UST Guitar Pickup
Comes pre-wired to a high quality endpin jack. The I/O UST captures all of the subtle nuances of Steel stringed guitars without being overly 'stringy' or metallic sounding. This pickup requires a small hole under the bridge saddle slot, but does not diminish the natural dynamics or volume of the instrument.
Retail $170.00, Buy Direct $150.00

Dynamic Duo Steel String Guitar Pickup:
This system combines an I/O UST pickup with a Model #27 SBT for one of the most dynamically expressive Steel string guitar pickup systems available. The outputs are typically wired in mono at the jack, but when wired in stereo, each of the two tonal contributions can be adjusted and blended independently. The tone is very woody and dynamic and can be dialed in excellently for most all steel string guitars.
Retail $220.00, Buy Direct $200.00

The Dynamic Trio Pickup System
This system combines an I/O UST pickup with our #54 dual element SBT for the best of everything. A truly natural sound even at very high stage volumes. This our flagship pickup system. Extremely woody and dynamic, this system is infinitely adjustable for dialing in tonal perfection on virtually every type of steel string guitar.
Retail $275.00, Buy Direct $255.00

"The Quack Buster",
PUTW's $60 on-board tone patch. Similar to our Model #27, the Quack Buster is a very easy to install soundboard transducer that is designed to be used with guitars that have existing saddle type pickups installed. As the name implies, the Quack Buster eliminates most if not all of the irritating piezo 'quack' from saddle type pickups, while at the same time adding warmth, depth, and harmonic detail to the signal.
Buy Direct $60.00

| Back To Products | View Cart |